Scaffolding of Sumy

1. Scaffolding for finishing and repair work on the facades of buildings:

1.1. The frame applied in almost all types of construction and repairs (brickwork, installation of facade systems, finishing, painting walls and ceilings, etc.) at a height of up to 60 m. More than 4 m are mounting. Using collars and ties of the forest, you can set individual columns that surround complex facades to circumvent the radii and indirect angles, joining with other scaffolding systems.
The diameter of the pipes
- 42mm (wall thickness 2.5 mm)
- 48mm (wall thickness of 3.00 mm),
- 60mm (wall thickness of 3.00 mm).
Load deck in m2 300 kg.

1.2. The V-clamp is designed to perform construction, repair, installation, painting, glazing, electrical, tiling, plumbing and restoration work inside and outside buildings up to a height of 40 meters. More than 5 m are mounting. Feature: mounting on uneven surfaces: sills, steps through the use of design of screw jacks.
The pipe diameter is 42 mm (wall thickness 2.8 mm)
The load on the decking on the m2 200 kg.

2. Scaffolding for masonry (brick) masonry:
2.1. Stand-Rigel - is intended for furnish of facades of buildings up to a height of 60 m, when the outside temperature is minus 40°C in areas with seismicity more than 6 points. More than 4 m are mounting.
Stand long 2,00 and 4,00 meters, with welded bushings inner diameter of 20 mm. Bolts with a length of from 0.85 to 2.00 meters.
Pipe diameter is 60mm (wall thickness of 3.00 mm).
Load deck in m2 at a span length of 1.8 m and 600 kg.

3. For construction and finishing works, both outside and inside buildings:

3.1. Construction mobile scaffolding (towers, rounds)
Pipe diameter is 42mm (wall thickness 2.5 mm)
Height tour from 2.5 to 20.5 m

 Tour repair "PROMETHEUS" (pad size 2,0x0,7 m) is designed to perform construction, installation and finishing works both inside and outside the building. The undeniable advantage of the stages is the possibility of fast and frequent travel.
The height of the towers from 2.3 to 10.3 m.
The load on the decking on the m2 200kg.

 Tour repair "TITAN" (pad size 2,5x1,5 m) is designed to perform construction, installation and finishing works both inside and outside the building. The undeniable advantage of the stages is the possibility of fast and frequent travel.
The height of the tower from 2.8 to 14.3 m.
The load on the deck 150 kg.

 Tower repair "VR-VERTICAL" (pad size 2,0x1,2 m) is designed to perform construction, installation and finishing works both inside and outside the building. The undeniable advantage of the stages is the possibility of fast and frequent travel.
The height of the tower from 4.1 to 17.3 m
The load on the decking on the m2 200kg.

 Tower repair "VR-AL" (pad size 2. 0x2. 0 m) is designed to perform construction, installation and finishing works both inside and outside the building. The undeniable advantage of the stages is the possibility of fast and frequent travel.
The height of the tower from 4.1 to 17.3 m
The load on the decking on the m2 200kg.

3.2. Minipocket:
 Mobile platforms - is intended for carrying out internal and external renovation and finishing works.
The diameter of pipes 28mm (thickness of wall 1.5 mm)
Height of 3.00 m and 2.20 m.
The load on the deck 150 kg.

 The telescopic platform is designed to perform all types of building work, including brickwork.
The height of the flooring installed at a height of 1,235 1,750 to m with step 0.1 m.
The load on the deck 150 kg.
Scaffolding for rent.